Specifications
E6 programming underfloor heating thermostat with LCD screen
1.CE ISO certificate
2.Daily programming set
3.Fast delivery
E6 24 hours programming underfloor heating thermostat with LCD screen
Introduction
The E6 is used for 2-position control with on/off output for the control the temperature by means of an NTC sensor placed externally or internally in the thermostat
The thermostat acquires the actual temperature with its built-in sensor or floor sensor, and the heating contact will close when the room temperature falls below the selected setpoint.
Application
For the control of warm-water (floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...
Features
On/off control output for heating device
Symbol indicator when heating is on
Temperature limitation function for protecting the wooden floor
Current room temperature displaying when the thermostat is switched-off
Potential-free output for Boiler, Pump,
Key-lock function for protecting the setted parameters (especially suitable for Public Places)
Technical data
Voltage:220V/230V
Power comsuption:2W
Setting range:10~55celsius(can adjust to 5-90celsius)
External limitation:5...60celsius(factor seting 35celsius)
Switch differential:0.5-10celsius adjustable
factory setting±1 celsius
Ambient temperature:-5~50 celsius
Protective houseing:IP20
Housing material: anti-flammable PC
Selection Table
| Model |
Current |
Application |
| E62.113 |
3A |
Built-in&floor sensor,floor limit sensor |
| E62.123 |
3A |
Built-in&floor sensor,floor limit sensor,a potential-free output |
| E62.116 |
16A |
Built-in&floor sensor,floor limit sensor,Cable heating |
Audited Supplier 
){kind=link}